Showing 49–61 of 61 results
-
₹490.00 (Including all taxes)
Product Description
4S20A 12V LFP Battery Management system (BMS) is designed specifically for lithium-iron Phosphate battery packs of 48V. It can measure, collect, process and use the information data of the battery in real time and ensure the safety and stability of the battery.
4S20A 12V LFP BMS has following salient features
- The protection of batteries from over-charge, over-discharge, over-current, short-circuit
- Short term water proof to protect battery pack from extreme weather and tough dynamic conditions.
- Common Port design – 2 wires only, Charge and discharge port share the same port.
- BMS comes with balancing connection wire connector to reduce the wire complexity and number of solders.
- Dust proof, shockproof and anti-squeezing, protects circuit from external damages.
- BMS has passive balancing function which gives long life to the batteries.
- The appearance is sealed by injection moulding process to improve moisture-proof and oxidation-proof circuit components and prolong the service life of the products and batteries.
-
₹970.00 (Including all taxes)
Product description
4S30A 12V Lithium ion Battery Management system (BMS) is designed specifically for lithium ion pack of nominal 14.8V 4 series cells of 3.7v. It can measure, process and use the real time data of the battery to ensure the safety, stability and long life of the battery pack
4S30A 12V LFP BMS has following salient features
- The protection of batteries from over-charge, over-discharge, over-current, short-circuit
- Short term waterproof to protect battery pack from extreme weather and tough dynamic conditions.
- Common Port design – 2 wires only, Charge and discharge port share the same port.
- BMS comes with balancing connection wire connector to reduce the wire complexity and number of solders.
- Dust proof, shockproof and anti-squeezing, protects circuit from external damages.
- BMS has passive balancing function which gives long life to the batteries.
- The appearance is sealed by injection moulding process to improve moisture-proof and oxidation-proof circuit components and prolong the service life of the products and batteries.
The BMS 4S 30A comes with equalization function which facilitate to keep the cells at same level and ensure prolong life. The components used in the BMS is
1) Highly integrated IC,
2) low resistance MOS, and
3) high current equalizer.
Battery Management System for 12V 4S30A battery pack configuration of Lithium Ion cells.
Over Charge Protection: Yes
Over Discharge Voltage: Yes
Short Circuit Protection: Yes
Cell balancing Yes
Over Current Protection Yes
-
Sale!
₹2,065.00 Original price was: ₹2,065.00.₹1,475.00Current price is: ₹1,475.00. (Including all taxes)
7.4V 10Ah Lithium Polymer Battery made with the latest technology and cutting edge precision process. The battery pack is equipped with an advanced built-in Battery Management System (BMS). This rechargeable battery is perfect for a wide range of applications, including medical devices, electronic gadgets, and more.
-
Sale!
₹475.00 Original price was: ₹475.00.₹385.00Current price is: ₹385.00. (Including all taxes)
7.4V 2600mAh lithium-ion battery is designed for POS machines and portable electronic devices, offering stable output and built-in BMS protection.
-
₹540.00 (Including all taxes)
7S20Amp 24V Lithium Ion Battery Management System (BMS) can be used with 18650 Li ion cells and Lithium polymer (Lipo) of different size.
The 7S20A Li ion BMS has protection for the battery over charge and over discharge, over current, short circuit, over-temperature. Refer product specification for more details.
The BMS 7S 20A comes with equalization function which facilitate to keep the cells at same level and ensure prolong life. The components used in the BMS is
1) Highly integrated IC,
2) low resistance MOS, and
3) high current equalizer.
One pack of BMS contains
1) Open BMS circuit board,
2) Wire with snap in connector for connection between cells and BMS.
-
₹55.00 (Including all taxes)
PVC heat shrink Sleeve is used to wrap the battery pack to protect against dust, abuse, insulation, and for aesthetic look. It can be used for 18650, 21700, 32650, 32700 etc battery packs. PVC heat shrink can also be used for protection for electronic components, LED pins, etc.
PVC heat shrink Sleeve should be selected based on the end size of the components and battery pack with shrinkage allowance added.
Installation Procedure for the PVC hear shrink:
1. Measure the required size of the sleeve.
2. Cut the PVC heat shrink to the required length.
2. Keep and position the battery in the middle of heat shrink Sleeve
3. Set the appropriate temperature and Shrink with Hot air gun.
-
₹100.00 (Including all taxes)
1s 18650 positive insulation ring – Solid insulation pad for 18650 batteries Positive Point.Good insulation, flexibility, water resistance, wear resistance, oil resistance, aging resistance, good gap material.It has the functions of insulation, shielding and anti-interference, providing high electrical insulation, mechanical strength, softness and elasticity.
Specification ;-
18mm outisde diameter
10mm inner diaameter
0.3mm thickness
-
₹190.00 (Including all taxes)
1s 32700 positive insulation ring – Solid insulation pad for 32700 batteries Positive Point.Good insulation, flexibility, water resistance, wear resistance, oil resistance, aging resistance, good gap material.It has the functions of insulation, shielding and anti-interference, providing high electrical insulation, mechanical strength, softness and elasticity.
Specification ;-
31.5mm outisde dia
18mm inner dia
0.3mm thick Inside ring
-
₹75.00 (Including all taxes)
Ease to assembly Wire with XH connector. Snap in type design of JST XH Socket protects from the wrong fitment preventing reverse polarity issue during fitment.
Pitch – 2.54mm
Wire – >10cms
Comes with Pack of 10 and multiple
-
₹100.00 (Including all taxes)
| Spindle Type |
Roll
|
| Material |
Polymide
|
| Color |
Metallic Brown
|
| Temperature Range |
-269C to 260C
|
| Tape Length (m) |
33
|
| Tape Width (mm) |
50
|
-
₹75.00 (Including all taxes)
Nickel strip is the most common material used in lithium-ion battery construction because it is easy to spot weld and has excellent anti-corrosive properties while having a relatively low cost.
1. Commercially Pure Nickel
2. High Electric and Thermal Conductivity.
3. Good Weldability and Solderability. It has good spot welding properties
4. High Corrosion Resistant.
5. Size 0.15 X 8 mm
-
₹120.00 (Including all taxes)
Lithium Battery management system (BMS) or protection control module (PCM) for 1S2A lithium-ion 3.7v battery. It can be used with 18650 cell, 21700 cell and Lithium polymer of different size.
The 1S2A Li-ion BMS has following protections
- Over charge protection
- Over discharge protection,
- Over current protection,
- Short circuit.
Refer PCM 1S2A product specifications for more details.
The BMS 1S 2A is must to protect the Lithium cells from extreme load conditions and ensure prolong life. The components used in the BMS are
1) Highly integrated IC,
2) low resistance MOS.
3) Nickel Strip for ease of assembly with cells
-
₹180.00 (Including all taxes)
Lithium Battery management system (BMS) or protection control module PCM for 1S5A lithium-ion 3.7v battery. It can be used with 18650 cell, 21700 cell and Lithium polymer of different size.
The 1S5A Li-ion BMS has following protections
- Over charge protection
- Over discharge protection,
- Over current protection,
- Short circuit.
Refer PCM 1S5A product specifications for more details.
The BMS 1S 5A is must to protect the Lithium cells from extreme load conditions and ensure prolong life. The components used in the BMS are
1) Highly integrated IC,
2) Low resistance MOS.
3) Additoinal Nickel Strip for ease of assembly with cells
