PVC heat shrink Sleeve is used to wrap the battery pack to protect against dust, abuse, insulation, and aesthetic look. It can be used for 18650, 21700, 32650, 32700 etc battery packs. PVC heat shrink can also be used for protection for electronic components, LED pins, etc.
PVC heat shrink Sleeve should be selected based on the end size of the components and battery pack with shrinkage allowance added.
Installation Procedure for the PVC hear shrink:
1. Measure the required size of the sleeve.
2. Cut the PVC heat shrink to the required length.
2. Keep and position the battery in the middle of heat shrink Sleeve
3. Set the appropriate temperature and Shrink with Hot air gun.
130mm PVC Heat Shrink Sleeves For Batteries 1 mtr
Size – 130 mm ± 4 mm
Length – 1 mtr
Shrinkage Temp – 100°C to 110°C
Chemical Resistant – good
Mechanical Strength – good
Heat Dissipation – Yes
Colour – Blue, Sky Blue
