Shop

  • Placeholder

    2S10A PCM Lithium Iron Phospate (LFP)

    ₹135.59

    1 Voltage
    Charging voltage DC:   7.2V CC/CV
    Balance voltage for single cell
    2 Current
    Balance current for single cell
    Current consumption Max:   20µA
    Maximal continuous charging current   10A
    Maximal continuous Discharging current    10A
    3 Over charge Protection
    Over charge detection voltage for single cell    3.90V ± 0.025V
    Over charge detection delay time   0.5 – 1.8S
    Over charge release voltage for single cell    3.80 ± 0.05V
    4 Over discharge protection
    Over discharge detection voltage for single cell    2.0V ± 0.08V
    Over discharge detection delay time    50 – 170mS
    Over discharge release voltage for single cell    3.0 ± 0.1V
    5 Over current protection
    Over current detection voltage    100 ± 30mv
    Over current detection current   30 ± 3A
    Detection delay time    5 – 15ms
    Release condition cut load
    6 Short protection
    Detection condition Exterior short circuit
    Detection delay time   200 – 500us
    Release condition cut load
    7 Resistance Protection circuitry(MOSFET)   ≤ 60mΩ
    8 Temperature
    Operating Temperature Range   -20 ~ +60°C
    Storage Temperature Range   -20 ~ +65°C

    9 Dimension

    L48*W9*T2.5mm

    Add to cartDone
  • 2S3A Protection Control Module (BMS) Lithium Ion (Pack of 5 nos.)

    2S3A Lithium Ion BMS(Pack of 5 Nos.)

    ₹152.54

    Lithium Battery management system (BMS) or protection control module PCM for  2S3A lithium-ion 3.7v battery. It can be used with 18650 cells, 21700 cells and Lithium polymer cells of different size.

    The 2S3A Li-ion BMS has following protections

    • Over charge protection
    • Over discharge protection,
    • Over current protection,
    • Short circuit.

    Refer PCM 2S3A product specifications for more details.

    The BMS 2S 3A is must to protect the Lithium cells from extreme load conditions and ensure prolong life. The components used in the BMS are
    1) Highly integrated IC,
    2) low resistance MOS.

    3) Additional Nickel Strip for ease of assembly with cells

    Add to cartDone
  • 3.7v 10000mAh Lithium Polymer Battery with Bms

    3.7V 10000mAh Lithium Polymer Battery with BMS (Battery Protection circuit)

    ₹351.69

    Lithium polymer 10000mAh battery pack with direct snap-in solution. Excellent for the application like Medical devices, Tracking devices, UPS battery, Toys, Portable electronic devices, power-bank etc. Any application where higher capacity required from the battery pack required in minimal weight. Made of premium brand cell and BMS to give you good performance and life. Each pack has high power density and optimum weight.

    The Battery pack comes with

    1) Lithium Polymer Cell –

    • Chemistry: Lithium Polymer (Li-Po)Capacity: 10000mAhVoltage: 3.7 volts.BIS certified Grade A cells

    2) BMS Protection control board -. Built in Overcharge Protection, Over-Discharge Protection, Short Circuit Protection, Limiting Current protection which is must for the Lithium cell.
    3) Connectors with wire – The battery pack is equipped with a XH2.54 connector and >10cms wire for easy integration into various devices or systems

    Applications:-

    Medical Devices:

    • The snap in connector makes 1260110 Lithium polymer battery pack quick to fit in the  portable medical devices, such as EVS machines, scanning and testing machines etc.

    IoT Devices:

    • Wireless Sensors and Devices: Being of small size 10000mAh Lipo batteries are often used in small, low-power IoT devices that require a compact and lightweight power source like GPS tracker, POS machine devices etc.

    Portable Power Banks:

    • External Battery Packs: LiPo cells are often used in portable power banks to provide additional charging capacity for smartphones, tablets, and other USB-powered devices.
    Add to cartDone
  • Sale! 3.7v 5000mah Lithium Polymer Battery with BMS (Battery Protection Circuit)

    3.7V 5000mAh Lithium Polymer Battery with BMS (Battery Management System)

    Original price was: ₹377.12.Current price is: ₹300.85.

    Lithium polymer 5000mAh battery pack with direct snap-in solution.  Excellent for the application like Medical devices, Tracking devices, UPS battery, Toys, Portable electronic devices, power-bank etc. Any application where higher capacity required from the battery pack required in minimal weight. Made of premium brand cell and BMS to give you good performance and life. Each pack has high power density and optimum weight.

    The Battery pack comes with

    1) Lithium Polymer Cell –

    • Chemistry: Lithium Polymer (Li-Po)Capacity: 5000mAhVoltage: 3.7 volts.

      BIS certified Grade A cells

    2) BMS Protection control board -. Built in Overcharge Protection, Over-Discharge Protection, Short Circuit Protection, Limiting Current protection which is must for the Lithium cell.
    3) Connectors with wire – The battery pack is equipped with a XH2.54 connector and >10cms wire for easy integration into various devices or systems

    Applications:-

    Medical Devices:

    • The snap in connector makes 955465 Lithium polymer battery pack quick to fit in the  portable medical devices, such as EVS machines, scanning and testing machines etc.

    IoT Devices:

    • Wireless Sensors and Devices: Being of small size 5000mAh Lipo batteries are often used in small, low-power IoT devices that require a compact and lightweight power source like GPS tracker, POS machine devices etc.

    Portable Power Banks:

    • External Battery Packs: LiPo cells are often used in portable power banks to provide additional charging capacity for smartphones, tablets, and other USB-powered devices.

     

     

    Add to cartDone
  • 32700 Lithium Iron Phosphate (LiFePo4) 3.2V 6000mAh 3C EV Grade Cell

    32700 Lithium Iron Phosphate (LiFePO4) 3.2V 6000mAh 3C EV Grade cell

    ₹224.58

    Lithium Iron Phosphate (LFP or LiFePO4) 32700 6000mAh cell  is a rechargeable cell with

    1. High energy density,
    2. Economical low cost Lithium battery,
    3. Long cycle life,
    4. Enhanced safety.
    5. Low Self Discharge rate
    6. Low Maintenance

    It is the perfect choice for high-performance and reliable energy storage.

    Usage

    These high quality cells are best suited for

    Electric Vehicles (EVs) :- Powering electric cars and other electric vehicles due to their high energy density, long cycle life, and safety features.

    Solar Energy Storage :-  Storing energy generated from solar panels for later use, providing a reliable and efficient rechargeable energy storage system (RESS) solution.

    Uninterruptible Power Supply (UPS) :-  Providing backup power in case of electrical grid failures, ensuring continuous power to critical systems.

    Renewable Energy Systems :-  Being used in off-grid and grid-tied renewable energy systems to store excess energy for later use.

    Marine Applications :- Powering electric boats, yachts, and marine equipment due to their high energy density, safety and lightweight characteristics.

    Backup Power Systems :- Serving as backup power sources for critical infrastructure, telecommunications, and emergency systems.

    Medical Devices :- Powering medical equipment and devices that require a reliable and long-lasting energy source.

    Power Tools :-  Providing high-performance and long-lasting power for cordless power tools used in various applications.

    Remote Monitoring Systems :- Powering remote sensors and monitoring equipment in applications such as environmental monitoring and industrial automation.

    Embrace a greener energy solution. Lithium Iron Phosphate is known for its environmentally friendly composition within all Lithium-ion cells.

    Add to cartDone
  • Sale! 32700 Battery Holder 2P (Pack of 20 Pcs)

    32700 Lithium Iron Phosphate Cell Holder 2P (Pack of 20 pcs)

    Original price was: ₹203.39.Current price is: ₹148.31.

    Diameter: 32.5mm

    Cell space : 34.5mm

    Dimension: 9.0*70*34.5mm

    Battery Type: 32650 lithium battery

    Add to cartDone
  • 32700 Lithium Iron Phosphate Battery Holder 3P (Pack of 10 nos)

    32700 Lithium Iron Phosphate Cell Holder 3P(Pack of 10 nos)

    ₹110.17

    Diameter: 32.5mm

    Cell space : 34.5mm

    Dimension: 9.0*103.5*34.5mm

    Battery Type: 32650 lithium battery

    Add to cartDone
  • Sale! 36V 13Ah Ebike Battery with hailong case

    36V 13Ah Ebike Battery with Hailong case

    Original price was: ₹12,500.00.Current price is: ₹10,508.47.

    Enjoy your Ebike/cycle rides efficiently with our high-performance 36V 13Ah Ebike battery, designed to elevate your cycling experience. Encased in a durable Hailong case for added protection and convenience, this battery offers long-lasting power for your electric bike adventures.

    Ebike battery comes with the inbuilt Battery management system (BMS) protection, which protect the battery pack with the extreme voltage, current and temperature. This battery pack can be used with motor of power of 250w to 350w motor easily.

    With the snap in arrangement this Battery can be charge at ease at home of any power outlet using the lithium-ion battery charger only refrain from using any other charger. The battery can be detached from the cycle and carry home to charge. When charged can be fitted on the ebike, locking keys are provided for protection against theft.

    For checking the available capacity of the battery, push button is given at very convenient location to check the available charge.

    Explore more miles, conquer challenging terrains, and enjoy seamless rides with our reliable Ebike battery. Upgrade your cycling journey today!

    Add to cartDone
  • 3S20A 11.1V Lithium Ion Battery Management System (BMS)

    3S20A 11.1V Lithium Ion Battery Management System (BMS)

    ₹186.44

    Product description:

    Battery management system (BMS) 3S20A for lithium-ion 11.1v battery packs. It can be used with 18650 cells and Lithium polymer of different size.

    The 3S20A Li ion BMS has protection for the battery over charge and over discharge, over current, short circuit, over-temperature. Refer product specification for more details.

    The BMS 3S20A comes with equalization function which facilitate to keep the cells at same level and ensure prolong life. The components used in the BMS is
    1) Highly integrated IC,
    2) low resistance MOS, and
    3) high current equalizer.

    Add to cartDone
  • 3S20A 12V Lithium Ion Battery Management System(BMS)

    3S20A 12V Lithium Ion Battery Management System(BMS)

    ₹542.37

    3S20A 11.1V Lithium ion  Battery Management system (BMS) is designed specifically for lithium ion  pack of 11.1V 3 series cells of 3.7v.  It can measure, process and use the real time data of the battery to ensure the safety, stability and long life of the battery pack

    3S20A 11.1V LFP BMS has following salient features

    • The protection of batteries from over-charge, over-discharge, over-current, short-circuit
    • Short term waterproof to protect battery pack from extreme weather and tough dynamic conditions.
    • Common Port design – 2 wires only, Charge and discharge port share the same port.
    • BMS comes with balancing connection wire connector to reduce the wire complexity and number of solders.
    • Dust proof, shockproof and anti-squeezing, protects circuit from external damages.
    • BMS has passive balancing function which gives long life to the batteries.
    • The appearance is sealed by injection moulding process to improve moisture-proof and oxidation-proof circuit components and prolong the service life of the products and batteries.

    The BMS 3S 20A comes with equalization function which facilitate to keep the cells at same level and ensure prolong life. The components used in the BMS is

    1) Highly integrated IC,

    2) low resistance MOS, and

    3) high current equalizer.

    Add to cartDone
  • 400mm PVC (Polyvinyl Cloride) heat shrink sleeve

    400mm PVC (PolyVinyl Cloride) Heat Shrink Sleeve

    ₹127.12

    PVC heat shrink Sleeve is used to wrap the battery pack to protect against dust, abuse, insulation, and for aesthetic look. It can be used for 18650, 21700, 32650, 32700 etc battery packs. PVC heat shrink can also be used for protection for electronic components, LED pins, etc.

    PVC heat shrink Sleeve should be selected based on the end size of the components and battery pack with shrinkage allowance added.

    Installation Procedure for the PVC hear shrink:

    1.  Measure the required size of the sleeve.

    2. Cut the PVC heat shrink to the required length.

    2. Keep and position the battery in the middle of heat shrink Sleeve

    3. Set the appropriate temperature and Shrink with Hot air gun.

    Add to cartDone
  • 4S100A 12V Battery Management System (BMS) for Lithium Iron Phosphate (LiFePo4I)

    4S100A 12V Battery Management system (BMS) for Lithium Iron Phosphate (LiFePO4)

    ₹1,466.10

    Product description –

    4S100A 12V Lithium iron phosphate Battery Management system (BMS) from JBD is designed specifically for battery pack made of Lithium Iron phosphate cells also known as LFP or LiFePO4. The battery packs of nominal voltage 14.8V contains 4 cells of 3.7v in series.   It can measure, process and use the real time data of the battery to ensure the safety, stability and long life of the cells and battery.

    4S100A 12V Lithium iron phosphate BMS has following salient features

    • The protection of batteries from over-charge, over-discharge, over-current, short-circuit
    • Short term waterproof to protect battery pack from extreme weather and tough dynamic conditions.
    • Common Port design – 2 wires only, Charge and discharge port share the same port.
    • BMS comes with balancing connection wire connector to reduce the wire complexity and number of solders.
    • BMS has passive balancing function which gives long life to the batteries.
    • The appearance is sealed by Heat Sink metal plate for the keeping the temperature under control and provide the BMS with long life.

    The BMS 4S 100A comes with equalization function which facilitate to keep the cells at same level and ensure prolong life. The components used in the BMS is

    1) Highly integrated IC,

    2) low resistance MOS, and

    3) high current equalizer.

    Add to cartDone
  • 4S100A 12V Lithium Ion Battery management system(bms)

    4S100A 12V Lithium Ion Battery Management System(BMS)

    ₹2,923.73

    Product description

    4S100A 12V Lithium ion Battery Management system (BMS) is designed specifically for lithium ion  pack of nominal 14.8V 4 series cells of 3.7v.  It can measure, process and use the real time data of the battery to ensure the safety, stability and long life of the battery pack

    4S100A 12V Lithium ion  BMS has following salient features

    • The protection of batteries from over-charge, over-discharge, over-current, short-circuit
    • Short term waterproof to protect battery pack from extreme weather and tough dynamic conditions.
    • Common Port design – 2 wires only, Charge and discharge port share the same port.
    • BMS comes with balancing connection wire connector to reduce the wire complexity and number of solders.
    • Dust proof, shockproof and anti-squeezing, protects circuit from external damages.
    • BMS has passive balancing function which gives long life to the batteries.
    • The appearance is sealed by injection moulding process to improve moisture-proof and oxidation-proof circuit components and prolong the service life of the products and batteries.

    The BMS 4S 100A comes with equalization function which facilitate to keep the cells at same level and ensure prolong life. The components used in the BMS is

    1) Highly integrated IC,

    2) low resistance MOS, and

    3) high current equalizer.

    Battery Management System for 12V 4S100A battery pack configuration of Lithium Ion cells.

    Over Charge Protection: Yes

    Over Discharge Voltage: Yes

    Short Circuit Protection: Yes

    Cell balancing Yes

    Over Current Protection Yes

    Add to cartDone
  • 4S10A 12V Battery Management System (BMS) for Lithium Iron Phosphate Battery

    4S10A 12V Battery Management System (BMS) for Lithium Iron Phosphate Battery

    ₹489.83

    Battery Management System for 12V 4S10A battery pack configuration of  Lithium Iron Phosphate cells.

    Over Charge Protection:              Yes

    Over Discharge Voltage:              Yes

    Short Circuit Protection:              Yes

    Cell balancing                                  Yes

    Over Current Protection              Yes

    Specification:-

    1 Discharge 

    Continuous Discharging Current                               10A

    Over discharge Current Detect Voltage                    30±10A

    2 Charge 

    Charging Voltage                                                          14.6V

    Charging Current                                                           5A

    3 Over charge protection

    Over Charge Protection Voltage                                 3.75±0.05V

    Release delay of Single Over Charge Protection      1S

    Over Charge Release Voltage                                      3.65±0.05V

    4 Cell balancing  

    Cell balancing Detection Voltage                                3.625V

    Cell balancing Current                                                  30±5mA

    5 Over discharge protection    

    Over Discharge Detect Voltage                                   2.1±0.05V

    Over discharge Detect Delay Time                             1S

    Over Discharger Release Voltage                               2.4±0.05V

    6 Charge/Discharge Overflow protection  

    Discharge Current Level 2 Protection Current         30±5A

    Discharge Current Level 2 Protection delay             1S

    Over Current Protection Condition                            Disconnect the load

    7 Short Circuit Protection             

    Protection Condition                                                    Short circuit of External Load

    Detection Delay Time                                                   250 uS

    Protection Release Condition                                     Disconnect the load

    8 Temperature Range                                                   -20ºC ~ 60ºC

    9 Internal Resistance                                                    ≤20mΩ

    10 Dimension

    L59*W35*T9 mm

    Add to cartDone
  • 4S10A 12V Lithium Ion Battery Management System (BMS)

    4S10A 12V Lithium Ion Battery Management System (BMS)

    ₹406.78

    Product description

    4S10A 12V Lithium ion  Battery Management system (BMS) is designed specifically for lithium ion  pack of nominal 14.8V 4 series cells of 3.7v.

    4S10A 12V Lithium-Ion BMS has following salient features

    • The protection of batteries from over-charge, over-discharge, over-current, short-circuit
    • Short term waterproof to protect battery pack from extreme weather and tough dynamic conditions.
    • Common Port design – 2 wires only, Charge and discharge port share the same port.
    • BMS comes with balancing connection wire connector to reduce the wire complexity and number of solders.
    • Dust proof, shockproof and anti-squeezing, protects circuit from external damages.
    • BMS has passive balancing function which gives long life to the batteries.
    • The appearance is sealed by injection moulding process to improve moisture-proof and oxidation-proof circuit components and prolong the service life of the products and batteries.

    Lithium Ion 4s10A BMS can measure, process and use the real time data of the battery to ensure the safety, stability and long life of the battery pack. The BMS 4S 10A comes with equalization function which facilitate to keep the cells at same level and ensure prolong life.

    Add to cartDone
  • 4S10A Battery Management System (BMS) for Lithium Iron Phosphate Battery (LFP)

    4S10A Battery Management System (BMS) for Lithium Iron Phosphate Battery (LFP)

    ₹211.86 
    1 Voltage
Charging voltage DC:   14.4V CC/CV
Balance voltage for single cell
2 Current
Balance current for single cell
Current consumption     ≤ 50 µA
Maximal continuous charging current   10A
Maximal continuous Discharging current   10A
3 Over charge Protection
Over charge detection voltage for single cell    3.90V ± 0.025V
Over charge detection delay time    500mS  - 1500mS
Over charge release voltage for single cell    3.80V ± 0.05V
4 Over discharge protection
Over discharge detection voltage for single cell    2.00V ± 0.08V
Over discharge detection delay time    500mS - 1500mS
Over discharge release voltage for single cell    2.5 ± 0.10V
5 Over current protection
Over current detection voltage     150 ± 25mv
Over current detection current     40 ± 5A
Detection delay time    50ms - 200ms
Release condition Cut load
6 Short protection
Detection condition Exterior short circuit
Detection delay time     200 - 500us
Release condition Cut load
7 Resistance Protection circuitry(MOSFET)    ≤ 50mΩ
8 Temperature
Operating Temperature Range      -20 ~+60°C
Storage Temperature Range      -20 ~ +65°C
    Add to cartDone